Simplify Asset Investment Planning with IBM MAS AIP and Optimizer

John Q. Todd

John Q. Todd

Senior Business Consultant TRM

November 18, 2026

Let’s assume that you have all your maintenance and asset management processes in place and are capturing good information about what is going on with your equipment. Now that it is budget time, you can put all that data to work on capital investment decisions. Your boss can stand behind those decisions, and they will help persuade the Board that the plan is reasonable because it rests on real data about both today’s equipment condition and future needs. 

Get out your spreadsheet from last year and make an appointment with Finance to see how they might attack this years’ budget problem. 

Or… you could adopt the use of IBM MAS Asset Investment Planning (AIP) and the Optimizer (release 9.2) to provide a framework that suits the context of your goals and uses your real data in MAS Manage to provide different scenarios for capital investments. 

Begin with a “Value Framework” 

A value framework is a collection of Goals, each with Cost and/or Key Performance Indicator (KPI) measures that are used to form the various scenarios for capital investment. Every organization is different, so it is difficult to suggest “best measures” for Asset Investment Planning (AIP), but here is a list for initial consideration: 

Goal = Reliability 

  • Service interruption cost 
  • Unplanned downtime KPIs 

Goal = Financial performance 

  • Reactive replacement cost 
  • Total Cost of Failure 

Goal = Safety 

  • Lost time injury cost 
  • Death or serious injury cost 

Goal = Environmental impact 

  • Emissions risk cost 

Emissions from existing equipment and the expectations of new equipment are cost and risk measures that can be part of the value framework. Depending upon the type of equipment, and the regulatory environment, emissions can result in significant fines and clean-up costs, so they must be considered in any capital purchase scenarios for the future.

MAS Manage AIP Goals page

Your list could be longer or shorter in Goals and/or measures for each. The point of the framework is to establish a repeatable guide for capital expense decision-making, especially when interpreting the results of the AIP analysis. The framework defines the Goals that must be met by the investments, and how they are measured, to base or constrain the AIP analysis. Now you have a consistent and visible method on the front end. 

As a side note, these measures are formed in the AIP framework using the Maximo Formula functionality inherent to MAS Manage. Maximo Formula syntax is very simple and is well suited for this purpose. 

maximo formula syntax example

Form the “Asset data” 

MAS AIP uses the distinction of “asset type” to run scenarios. Obviously, a tractor-trailer rig would have different CapEx, OpEx, and history than a tilt-up building. However, both can be intervened with by being replaced or refurbished over their lifecycle. 

Given you know the list(s) of assets to consider, their installation dates, and failure/end of life curves, a portion of the strategy can be formed. Then the CapEx/OpEx costs for those potential replacements or refurbishments can be defined, as well as the impact those interventions have on the expected life of the equipment. Finally, the average annual maintenance costs can be brought into the definition for the Optimizer to use as an input into the analysis process. 

MAS Manage Asset Investment Planning Asset Data page image

This step exposes the value of the asset data you have been collecting in the CMMS/EAM system over the years. Each recorded failure and captured related costs now have a vote into the future of the equipment. 

Weibull distribution, the end-of-life analysis MAS Manage AIP image

With the use of the familiar Weibull distribution, the end-of-life analysis will be based upon real data coming from the MAS Manage component. This is an important element of the “asset data” definition step and may take a little figuring to understand how to produce a chart that suits the available data and the asset type(s). 

Describe a general asset strategy and run the scenarios 

The next step is to describe how these interventions are applied over the lifecycle of the equipment. For example, if the planning horizon is 20 years, a particular asset might be replaced 2 times and refurbished 4 times, each time its life is extended by some percentage. This strategy may also include budget constraints whether real or implied by discussions with upper management. 

MAS Manage AIP asset data optimizer

MAS Manage AIP asset interventions

Lather, rinse, repeat – and pick a scenario to publish 

When a strategy is run through the Optimizer, a single or a group of scenarios is produced for review and consideration. The Cost and KPI measures are calculated and displayed, as well as the Total Cost of Ownership and other elements that can be used for decision-making. 

MAS Manage AIP KPI Performance data and cost data

It may take several runs at optimizing the strategy to come up with the single scenario that makes sense to pursue. This is the entire point of the AIP component of MAS… the ability to try different values and run them through a consistent framework to produce reliable results. 

Once a scenario is agreed upon, it is published within the system and is now available for further action. 

Generate work orders to begin the investment process 

Each intervention listed from the published scenario is available to be related to a work order in the MAS Manage system. Depending upon your business process, the published scenario along with its specific interventions may require approval before being acted upon. This is accommodated in AIP as each intervention can have its own work order of which are perhaps doled out over a budget year(s). 

The work orders themselves have their own “approval” lifecycle, so they can be planned, scheduled, assigned, and executed just as any other work order in MAS Manage. In fact, these “capital” work orders can be gathered into their own schedule using the MAS Manage Graphical Scheduling suite of applications. 

Wrap up 

The goal of this article was to give you a high-level view of how an organization could use a MAS component such as AIP. Further discussion and more details will come out as the use of AIP is explored and mapped to the organizations’ method of capital expense planning. 

TRM has been working with clients for many years, not only in deploying solutions such as IBM MAS, but also assisting in the refinement and definition of core business processes. Capital expense planning via the use of data captured in the work and asset management solutions such as MAS is a common task for us to perform. Make contact and see how we might be able to help you bridge the gap from data to analysis to actionable decisions. 

Download the IBM MAS Buyer’s Guide to work through six critical decisions that determine the success of your IBM MAS modernization process. 

 

Ready to elevate your asset management?

Connect with TRM to start your journey toward exceptional performance.


Related Resources

Explore insights, guides, and tools designed to help you unlock greater asset management performance and business value.

Unlock smarter
asset management

Ready to elevate your asset management?
Connect with TRM to start your journey toward
exceptional performance.

Let’s talk